Moulded part for 90° pipe bends, matching the Rockwool mineral wool shell RS800 heating pipe insulation of the same name. Consists of three segments which then form a 90° elbow. Suitable for heating, hot water pipes and much more. The bend does not need to be cut open lengthwise with a sharp knife. We recommend our aluminium tape for this to keep the rock wool clean, permanently in shape and to finish the transitions almost seamlessly.
Areas of application:
Thermal insulation of heating and hot water pipes according to the Energy Saving Ordinance (EnEV)/from 1.11.2020 according to the Building Energy Act (GEG), solar pipes as well as pipes in operational systems. Furthermore, ROCKWOOL 800 can be used as fire protection cladding of combustible pipelines in escape and rescue routes.
The ROCKWOOL 800 pipe shell is also a component of the Conlit pipe sealing system and is used there as further insulation upstream and downstream of the component penetration.
Technical data:
- Building material class A2
- Fire behaviour: non-combustible
- Melting point > 1000 °C DIN 4102-17
- Upper application temperature rock wool side up to 250 °C
- Aluminium side up to 80 °C
- calculated value of thermal conductivity see manufacturer's DoP
- Specific heat capacity cp 0.84 kJ/(kgK)
- Diffusion-equivalent air layer thickness sd > 200 lamination
- AS quality Application in combination AGI Q 135 with austenitic steels
- silicone-free free of paint wetting substances according to VW test 3.10.7
- hydrophobic = 10 vol. % water absorption AGI Q 136
| Item information |
Value |
| Areas of application: |
|
| Shipping weight: |
0,20 kg
|
| Item weight: |
0,20 kg
|
Product safety information
Manufacturer information:
Rockwool
Rockwool Str. 37-41
Nordrhein-Westfalen
Gladbeck, Deutschland, 45966
kundendienst@rockwool.com
http://www.rockwool.de/
-800-35-20.jpg)
-800-28-20.jpg)
-800-22-20.jpg)
-800-18-20.jpg)
-800-15-20.jpg)
.jpg)
-fuer-rohrisolierung.jpg)
